Honda EU3000is Cold Climate Kit - Installation of Grenergy Tri-Fuel Kit w/ Factory Breather Heater Assembly

This notice is only for those who have the Cold Climate Kit included in the EU3000is generator. Installation of our kit is very much possible with a few additional steps to retain the breather heater assembly with full functionality of the Grenergy Tri-Fuel kit. 

Before I go any further I would like to credit DP Bourdages of Québec, Canada. For taking the time to produce step by step illustrations with photos, of installing the Grenergy kit on his own Honda EU3000is generator equipped with the Cold Climate Kit.

Mr. DP Bourdages wanted to ensure that everyone else who needed help can reliably refer to his illustrations for guidance with confidence. I myself appreciate his professionalism in adding his work to our install guide.  

"The generator HONDA EU3000IS runs very well and smoothly with the Grenergy propane kit, it starts easily and when I tested it it was minus 4 degrees Celsius (24.8 F) and it ran very well."

... DP Bourdages

Additional credits: 

https://community.goodsam.com/discussions/technicalissues/eu3000is-in-cold-weather/2465736/replies/2465747

The image itself :

https://farm1.staticflickr.com/498/31305360034_03afefe97b_o.png

Image credit to (Robert@Honda) who posted the parts publication in the PDF the 6 of January 2017.